基于UG的電話機機座上蓋－－塑料模具設計與仿真分析
基于UG的電話機機座上蓋－－塑料模具設計與仿真分析
摘 要：隨著CAD/CAE/CAM技術在模具行業的廣泛應用，傳統的模具設計、制造方法已經逐漸被取代。本文全面的寫到了用UG進行電話機機座的注射模具設計過程，重點介紹了CAD/CAE/CAM技術在注射模具中應用。在了解電話機機座造型特點的基礎上，利用專業軟件UG對其進行3維建模，再生成2維工程圖。然后利用UG里的MoldWizard模塊進行注塑模具設計，在模具設計基本完成之后，通過Moldflow進行注塑成型流動分析，可以發現設計中存在的缺陷，優化模具設計結構，從而保證模具設計的合理性。最后利用UG對模具型腔進行模擬加工，自動生成加工程序并進行后置處理。
關鍵詞：CAD；CAE；CAM；注塑模；成型分析；模擬加工。
The buttons of telephone injection molding design
based on the UG and simulation analysis
Abstract: Along with the CAD/CAE/CAM technology in the moldprofession widespread application, the traditional mold design, themanufacture method gradually is already substituted. This articlecomprehensive wrote has carried on the telephone in the buttons injection molding design process with UG, introduced with emphasis the CAD/CAE/CAM technology in injection molding to apply. In understood thetelephone in the buttons modelling characteristic in the foundation, use specialized software UG carries on the three dimensional modelling toit, again produces the two-dimensional engineering plat. Then uses the MoldWizard module of UG to carry on injection molding design, basically completes after the mold design, carries on through Moldflow caststakes shape the flow analysis, may discover in the design exists theflaw, optimizes the mold design of structure, thus guaranteed the mold designs rationality. Finally carries on the simulation processing using UG to the mold cavity, automatically produces the processing procedure and carries on postpositioned processing.
Key word: CAD; CAE; CAM; injection molding; Takes shape theanalysis; Simulation processing.
包括：畢業設計圖紙、畢業論文、開題報告、外文翻譯、實習總結、中期檢查
【基于UG的電話機機座上蓋－－塑料模具設計與仿真分析】相關文章：
基于UG的電話機機座上蓋塑料模具設計與仿真分析03-07
基于UG的電話機機座下蓋塑料模具設計與仿真分析03-07
基于MATLAB的正交振幅調制與解調仿真分析(一)03-07
竹制塑料中棚扎制及蓋膜技術01-06
基于OPNET的IEEE 802.11e協議中HCF機制仿真與分析03-30