亚洲AV日韩AⅤ综合手机在线观看,激情婷婷久久综合色,欧美色五月婷婷久久,久久国产精品99久久人人澡

  • <abbr id="uk6uq"><abbr id="uk6uq"></abbr></abbr>
  • <tbody id="uk6uq"></tbody>
  • H3C交換機簡單配置方法

    時間:2023-02-26 21:42:51 H3C認證 我要投稿
    • 相關推薦

    H3C交換機簡單配置方法

      H3C交換機怎么配置,簡單的配置命令是什么?下面yjbys小編為大家分享的是H3C交換機H126A最基本配置命令方法,希望對對大家學習交換機基本配置有幫助!

      配置中可以通過display current-configura命令來顯示當前使用的配置內容。

      # 配置VLAN 1

      system-view

      System View:return to User View with Ctrl+Z.

      [Sysname]vlan 1

      [Sysname-vlan1]quit

      [Sysname]management-vlan1

      [Sysname]interfaceVlan-interface 1

      [Sysname-Vlan-interface1]ip address 10.0.1.201 255.255.255.0

      # 顯示VLAN 接口1 的相關信息。

      display ip interface Vlan-interface 1

      # 創建VLAN(H3C不支持cisco的VTP,所以只能添加靜態VLAN)

      system-view

      System View:return to User View with Ctrl+Z.

      [H3C_TEST]vlan 99

      [H3C_TEST-vlan99]nameseicoffice

      [H3C_TEST-vlan99]quit

      # 把交換機的端端口劃分到相應的Vlan中

      [H3C_TEST]interfaceethernet1/0/2//進入端口模式

      [H3C_TEST-Ethernet1/0/2]portlink-type access //設置端口的類型為access

      [H3C_TEST-Ethernet1/0/2]portaccess vlan 99//把當前端口劃到vlan 99

      [H3C_TEST]vlan 99

      [H3C_TEST-vlan99]portethernet1/0/1 to ethernet1/0/24//把以及網端口1/0/1到1/0/24劃到vlan99

      [H3C_TEST-vlan99]quit

      [H3C_TEST-GigabitEthernet1/2/1]porttrunk permit vlan 1 99 // {ID|All} 設置trunk端口允許通過的VLAN

      ------------------------------------

      # 配置本地用戶

      system-view

      System View:return to User View with Ctrl+Z.

      [Sysname]local-userh3c

      New local useradded.

      [Sysname-luser-h3c]service-typetelnet level 3

      [Sysname-luser-h3c]passwordsimple h3c

      # 配置歡迎信息

      [H3C_TEST]headerlogin %Welcome to login h3c!%

      # 配置用戶認證方式telnet(vty 0-4)

      [H3C_TEST]user-interfacevty 0 4

      [H3C_TEST-ui-vty0-4]authentication-modescheme

      [H3C_TEST-ui-vty0-4]protocolinbound telnet

      [H3C_TEST-ui-vty0-4]superauthentication-mode super-password

      [H3C_TEST-ui-vty0-4]quit

      [H3C_TEST]superpassword level 3 simple h3c //用戶登陸后提升權限的密碼

      # 配置Radius策略

      [H3C_TEST]radiusscheme radius1

      New Radius scheme

      [H3C_TEST-radius-radius1]primaryauthentication 10.0.1.253 1645

      [H3C_TEST-radius-radius1]primaryaccounting 10.0.1.253 1646

      [H3C_TEST-radius-radius1]secondaryauthentication 127.0.0.1 1645

      [H3C_TEST-radius-radius1]secondaryaccounting 127.0.0.1 1646

      [H3C_TEST-radius-radius1]timer5

      [H3C_TEST-radius-radius1]keyauthentication h3c

      [H3C_TEST-radius-radius1]keyaccounting h3c

      [H3C_TEST-radius-radius1]server-typeextended

      [H3C_TEST-radius-radius1]user-name-formatwithout-domain

      # 配置域

      [H3C_TEST]domainh3c

      [H3C_TEST-isp-h3c]authenticationradius-scheme radius1 local

      [H3C_TEST-isp-h3c]schemeradius-scheme radius1 local

      [H3C_TEST]domaindefault enable h3c

      # 配置在遠程認證失敗時,本地認證的key

      [H3C_TEST]local-servernas-ip 127.0.0.1 key h3c

      H3C交換機路由器telnet和console口登錄配置

      級別說明

      Level 名稱

      命令

      0  參觀

      ping、tracert、telnet

      1  監控

      display、debugging

      2  配置

      所有配置命令(管理級的命令除外)

      3  管理

      文件系統命令、FTP命令、TFTP命令、XMODEM命令

      telnet僅用密碼登錄,管理員權限

      [Router]user-interfacevty 0 4[Router-ui-vty0-4]user privilege level 3[Router-ui-vty0-4]setauthentication password simple abc

      telnet僅用密碼登錄,非管理員權限

      [Router]superpassword level 3 simple super

      [Router]user-interfacevty 0 4[Router-ui-vty0-4]user privilege level 1[Router-ui-vty0-4]setauthentication password simple abc

      telnet使用路由器上配置的用戶名密碼登錄,管理員權限

      [Router]local-useradmin password simple admin[Router]local-user admin service-typetelnet[Router]local-user admin level 3

      [Router]user-interfacevty 0 4[Router-ui-vty0-4]authentication-mode local

      telnet使用路由器上配置的用戶名密碼登錄,非管理員權限

      [Router]superpassword level 3 simple super

      [Router]local-usermanage password simple manage[Router]local-user manage service-typetelnet[Router]local-user manage level 2

      [Router]user-interfacevty 0 4[Router-ui-vty0-4]authentication-mode local

      對console口設置密碼,登錄后使用管理員權限

      [Router]user-interfacecon 0[Router-ui-console0]user privilege level 3[Router-ui-console0]setauthentication password simple abc

      對console口設置密碼,登錄后使用非管理員權限

      [Router]superpassword level 3 simple super

      [Router]user-interfacecon 0[Router-ui-console0]user privilege level 1[Router-ui-console0]setauthentication password simple abc

      對console口設置用戶名和密碼,登錄后使用管理員權限

      [Router]local-useradmin password simple admin[Router]local-user admin service-typeterminal[Router]local-user admin level 3

      [Router]user-interfacecon 0[Router-ui-console0]authentication-mode local

      對console口設置用戶名和密碼,登錄后使用非管理員權限

      [Router]superpassword level 3 simple super

      [Router]local-usermanage password simple manage[Router]local-user manage service-typeterminal[Router]local-user manage level 2

      [Router]user-interfacecon 0[Router-ui-console0]authentication-mode local

      simple 是明文顯示,cipher 是加密顯示

      路由器不設置telnet登錄配置時,用戶無法通過telnet登錄到路由器上

      [Router-ui-vty0-4]acl2000 inbound可以通過acl的規則只允許符合條件的用戶遠程登錄路由器

      路由器命令

      ~~~~~~~~~~

      [Quidway]displayversion 顯示版本信息

      [Quidway]displaycurrent-configuration 顯示當前配置

      [Quidway]displayinterfaces 顯示接口信息

      [Quidway]displayip route 顯示路由信息

      [Quidway]sysnameaabbcc 更改主機名

      [Quidway]superpasswrod 123456 設置口令

      [Quidway]interfaceserial0 進入接口

      [Quidway-serial0]ipaddress

      [Quidway-serial0]undoshutdown 激活端口

      [Quidway]link-protocolhdlc 綁定hdlc協議

      [Quidway]user-interfacevty 0 4

      [Quidway-ui-vty0-4]authentication-modepassword

      [Quidway-ui-vty0-4]setauthentication-mode password simple 222

      [Quidway-ui-vty0-4]userprivilege level 3

      [Quidway-ui-vty0-4]quit

      [Quidway]debugginghdlc all serial0 顯示所有信息

      [Quidway]debugginghdlc event serial0 調試事件信息

      [Quidway]debugginghdlc packet serial0 顯示包的信息

      靜態路由:

      [Quidway]iproute-static {interfacenumber|nexthop}[value][reject|blackhole]

      例如:

      [Quidway]iproute-static 129.1.0.0 16 10.0.0.2

      [Quidway]iproute-static 129.1.0.0 255.255.0.0 10.0.0.2

      [Quidway]iproute-static 129.1.0.0 16 Serial 2

      [Quidway]ip route-static0.0.0.0 0.0.0.0 10.0.0.2

      動態路由:

      [Quidway]rip

      [Quidway]rip work

      [Quidway]rip input

      [Quidway]ripoutput

      [Quidway-rip]network1.0.0.0 可以all

      [Quidway-rip]network2.0.0.0

      [Quidway-rip]peerip-address

      [Quidway-rip]summary

      [Quidway]ripversion 1

      [Quidway]ripversion 2 multicast

      [Quidway-Ethernet0]ripsplit-horizon 水平分隔

      [Quidway]router idA.B.C.D 配置路由器的ID

      [Quidway]ospfenable 啟動OSPF協議

      [Quidway-ospf]import-routedirect 引入直聯路由

      [Quidway-Serial0]ospfenable area 配置OSPF區域

      標準訪問列表命令格式如下:

      acl [match-order config|auto] 默認前者順序匹配。

      rule[normal|special]{permit|deny} [source source-addr source-wildcard|any]

      例:

      [Quidway]acl 10

      [Quidway-acl-10]rulenormal permit source 10.0.0.0 0.0.0.255

      [Quidway-acl-10]rulenormal deny source any

      擴展訪問控制列表配置命令

      配置TCP/UDP協議的擴展訪問列表:

      rule{normal|special}{permit|deny}{tcp|udp}source {|any}destination|any}

      [operate]

      配置ICMP協議的擴展訪問列表:

      rule{normal|special}{permit|deny}icmp source {|any]destination{|any]

      [icmp-code][logging]

      擴展訪問控制列表操作符的含義

      equalportnumber 等于

      greater-thanportnumber 大于

      less-thanportnumber 小于

      not-equalportnumber 不等

      range portnumber1portnumber2 區間

      擴展訪問控制列表舉例

      [Quidway]acl 101

      [Quidway-acl-101]ruledeny souce any destination any

      [Quidway-acl-101]rulepermit icmp source any destination any icmp-type echo

      [Quidway-acl-101]rulepermit icmp source any destination any icmp-type echo-reply

      [Quidway]acl 102

      [Quidway-acl-102]rulepermit ip source 10.0.0.1 0.0.0.0 destination 202.0.0.1 0.0.0.0

      [Quidway-acl-102]ruledeny ip source any destination any

      [Quidway]acl 103

      [Quidway-acl-103]rulepermit tcp source any destination 10.0.0.1 0.0.0.0 destination-port equal ftp

      [Quidway-acl-103]rulepermit tcp source any destination 10.0.0.2 0.0.0.0 destination-port equal www

      [Quidway]firewallenable

      [Quidway]firewalldefault permit|deny

      [Quidway]int e0

      [Quidway-Ethernet0]firewallpacket-filter 101 inbound|outbound

      地址轉換配置舉例

      [Quidway]firewallenable

      [Quidway]firewalldefault permit

      [Quidway]acl 101

      [Quidway-acl-101]ruledeny ip source any destination any

      [Quidway-acl-101]rulepermit ip source 129.38.1.4 0 destination any

      [Quidway-acl-101]rulepermit ip source 129.38.1.1 0 destination any

      [Quidway-acl-101]rulepermit ip source 129.38.1.2 0 destination any

      [Quidway-acl-101]rulepermit ip source 129.38.1.3 0 destination any

      [Quidway]acl 102

      [Quidway-acl-102]rulepermit tcp source 202.39.2.3 0 destination 202.38.160.1 0

      [Quidway-acl-102]rulepermit tcp source any destination 202.38.160.1 0 destination-port great-than

      1024

      [Quidway-Ethernet0]firewallpacket-filter 101 inbound

      [Quidway-Serial0]firewallpacket-filter 102 inbound

      [Quidway]nataddress-group 202.38.160.101 202.38.160.103 pool1

      [Quidway]acl 1

      [Quidway-acl-1]rulepermit source 10.110.10.0 0.0.0.255

      [Quidway-acl-1]ruledeny source any

      [Quidway-acl-1]intserial 0

      [Quidway-Serial0]natoutbound 1 address-group pool1

      [Quidway-Serial0]natserver global 202.38.160.101 inside 10.110.10.1 ftp tcp

      [Quidway-Serial0]natserver global 202.38.160.102 inside 10.110.10.2 www tcp

      [Quidway-Serial0]natserver global 202.38.160.102 8080 inside 10.110.10.3 www tcp

      [Quidway-Serial0]natserver global 202.38.160.103 inside 10.110.10.4 smtp udp

      PPP驗證:

      主驗方:pap|chap

      [Quidway]local-useru2 password {simple|cipher} aaa

      [Quidway]interfaceserial 0

      [Quidway-serial0]pppauthentication-mode {pap|chap}

      [Quidway-serial0]pppchap user u1 //pap時,不用此句

      pap被驗方:

      [Quidway]interfaceserial 0

      [Quidway-serial0]ppppap local-user u2 password {simple|cipher} aaa

      chap被驗方:

      [Quidway]interfaceserial 0

      [Quidway-serial0]pppchap user u1

      [Quidway-serial0]local-useru2 password {simple|cipher} aaa

      ----------------------------------------------------

      H3C路由器配置方案注解

      #

      version 5.20,Release 1719 //版本信息,自動顯示

      #

      sysname H3C //給設備命名為H3C

      #

      super passwordlevel 3 cipher 7WC1<3E`[Y)./a!1$H@GYA!! //設置super密碼

      #

      domain defaultenable system

      #

      telnet serverenable

      #

      vlan 1

      #

      domain system

      access-limitdisable

      state active

      idle-cut disable

      self-service-urldisable

      #

      user-group system//從此以上未標注的為默認配置,不用去理解

      #

      local-user admin//添加用戶名為admin的用戶

      password cipher.]@USE=B,53Q=^Q`MAF4<1!! //設置密碼(密文)

      authorization-attributelevel 3 //設置用戶權限為3級(最高)

      service-typetelnet //設置用戶的模式為telnet用戶

      local-user share//從此往下四行同上

      password cipher[HM$GH8P1GSQ=^Q`MAF4<1!!

      authorization-attributelevel 1

      service-type telnet

      #

      controller E1 0/0//進入E1物理端口(兩兆口)

      using e1 //設置端口模式為E1(設置后下面會出現interface Serial0/0:0)

      #

      interface Aux0 //從此以下三行為主控板aux口默認配置

      async mode flow

      link-protocol ppp

      #

      interfaceEthernet0/0 //進入E0/0接口(以太網口)

      port link-moderoute //配置該接口為路由模式

      #

      interface Serial0/0:0//進入Serial0/0:0端口(前面用using e1命令后產生,對應E1端口)

      link-protocol ppp//配置鏈路協議為ppp(默認)

      ip address74.1.63.170 255.255.255.252 //配置該接口IP地址

      #

      interface NULL0

      #

      interfaceVlan-interface1 //lan口vlan地址(lan口地址)

      ip address192.168.1.1 255.255.255.0

      #

      interfaceEthernet0/1

      port link-modebridge

      #

      interfaceEthernet0/2

      port link-modebridge

      #

      interfaceEthernet0/3

      port link-modebridge

      #

      interfaceEthernet0/4

      port link-modebridge

      #

      ip route-static74.1.8.0 255.255.255.0 74.1.63.169 //配置靜態路由

      #

      user-interface aux0

      user-interface vty0 4 //進入vty接口(遠程登陸接口)0-4通道

      authentication-modescheme //配置登陸驗證類型為scheme(用戶驗證型)

      user privilegelevel 1 //設置當驗證模式不是scheme類型時的登錄級別(廢配置)

      #

      return

    【H3C交換機簡單配置方法】相關文章:

    H3C交換機簡單配置案例08-11

    h3c交換機配置06-20

    H3C交換機端口鏡像配置方法06-20

    h3c交換機配置telnet配置教程09-23

    H3C交換機清空配置07-27

    2016年H3C交換機簡單配置案例05-20

    H3C配置三層交換機配置實例05-12

    H3C交換機系統基本配置08-30

    H3C交換機配置命令詳解06-20